I have had quite a few questions in regards to the Isonychia Wiggle Emerger, and the best way to tie with the Flymen Fishing Company-Articulated Wiggle Shanks so I decided to keep this part in a separate post, so that you can refer back to it as needed.
“How do I tie on them? They’re too long. Should I cut them first?”
Affixing a shank in your vise
Trying to tie on a shank when its fully extended in the jaws of your vise, may prove to be somewhat aggravating. Not to mention you can easily lose track of the final length that you are looking to accomplish with the body. Tying with it already cut is harder to do, since you need the extra length to hold into the jaws while you tie. I recommend that once you decide on the length of the PHYSICAL body (not the tails that may be hanging loose on lets say a pheasant tail) that you keep only that amount of shank showing.
I would like to thank the Ridge & Valley TU Chapter for inviting me to tie a few patterns for some of their members on June 7th, 2017. I demonstrated the Renegade dry fly and the Isonychia Wiggle
Both step-by-step tutorials can be found by clicking the links to the fly names above. It was a great time and I hope that you were able to take something away from the demonstration, that you will be able to apply to your own tying.
It’s awesome when you have a whole room engaged and everyone discussing different aspects of patterns; as we all can learn different things from each other. There is a wealth of knowledge out there and to be able to share what I know with others, is what always makes this so much more enjoyable.
The Isonychia is a decent sized mayfly that can be so numerous at times, you simply aren’t sure where to cast. There have been plenty of times at dusk where I see more trout taking emergers than I do the mayflies that are aimlessly drifting on the surface, when the hatch is in full swing. Some trout will even come barreling our of the water to take them as they rise and swim through the water column.
Some of them do make it, and the evidence can be found strewn all around the river bank where they had once climbed up onto the rocks to finish their transformation.
The next time you’re in the middle of an Isonychia hatch; try to divert your eyes away from the far bank for a few seconds, and look down. Concentrate on what is right in front of you at your feet. If you stand still, gazing into the water as it swiftly passes, you will see the nymphs. They are almost breaking dancing as they head down river! Many of them do not make it to adulthood, they become stuck in the film.
That is where this pattern comes in handy, and its for two reasons. When dead drifted tied just the way it is, it gives a little movement. A little extra attention grabber as it passes the eye of a hungry trout. Then after the fish have destroyed it to the point that your CDC bubble is ruined? Let it sink and swing it! It will wiggle and thrash around with those broken CDC fibers and continue to work.
My husband loves fishing rusty spinners almost as much as ‘some’ people hate when I leave my dubbing box open..😂😂😂😂😂😂😂😂😂😂😂😂😂
So when I saw that the makers of Reel Wings had revamped a product that I once had trouble using, I just had to give them another go! I was immediately hooked. They give a lifelike appearance to wings like no other material can, and are a breeze to cast. So if you, like me, had been a little nervous in the past, fear no more!
Spinners are excellent flies to fish as it gets dark, but as always; adjust the size and tone of colors to suit your needs in your area.
A few years ago I picked up a package of Reel Wings at Dette Trout Flies and while I was super excited to use them once arriving home; I found that I broke more of them than I was able to use properly.
I tried and tried again, but after becoming frustrated, I put the few that I had left in the drawer, and honestly.. like many other materials before them.. I they were forgotten about.
Until I was made aware that they had revamped the packaging and material; for ease of use and durability!
So If you were like me, and had a little bit of trouble getting the hang of this material in the past; have no fear! Take a look at this step by step and the improvements made and I’m sure you will be running to the shop to pick some up, and wont be afraid to use up the old ones as well.